RSS Git Download  Clone
Raw Blame History
[//]: #@corifeus-header # ☕ OpenWrt with latest NodeJs, Redis and Linksys WRT Wifi [//]: #@corifeus-header:end # WPS It is only working, if only these are built in the firmware: ```hostapd-common wpad-mini```, nothing other like that. If not, it will not work. There were some changes. So this is how it works with ```18.06.2```. Minimal steps needed to get WPS running: In ```/etc/config/wireless``` it is important in the ```wifi-iface```only in the 2.4 GHZ. ```text option wps_pushbutton '1' ``` But you can do it with ```LUCI``` as well. ```bash opkg update opkg remove wpad-mini # if you remove it, it will not work opkg install wpad hostapd-utils reboot && exit # wait about 2 minutes hostapd_cli -i wlan1 wps_pbc ``` # Debug (not needed) ```bash reboot && exit # regenerate the wifi interface rm -f /etc/config/wireless wifi config iw reg get iw dev ``` ## Actual Linksys 3200ACM WPS Do what it says above. Then on router on the bottom right there is the WPS button. Click for like 3 seconds or more and it will work. ### Example ```text config wifi-iface 'default_radio1' option device 'radio1' option network 'lan' option mode 'ap' option ssid 'your-ssid' option key 'your-secret' option encryption 'psk2+ccmp' option wps_pushbutton '1' ``` [//]: #@corifeus-footer --- [**P3X-OPENWRT-INSOMNIA**]( Build v2019.4.5 [![Donate for Corifeus / P3X](]( [![Contact Corifeus / P3X](]( [![Like Corifeus @ Facebook](]( ## P3X Sponsors [IntelliJ - The most intelligent Java IDE]( [![JetBrains](]( [![NoSQLBooster](]( [The Smartest IDE for MongoDB]( [//]: #@corifeus-footer:end